1. - Air Atomizing nozzles produce the finest mist of any nozzle type

2. Save precious time and money from maintenance of clogged, non-performing nozzles with our Cleanable fog pin nozzle

3. The Bevelled nozzles were fabricated based on the circular nozzle but with inclination angles of 30° and 60° with respect to the non-Bevelled nozzle exit

4. Nozzles with thrust levels exceeding 45 kN or nozzle throat erosion rates of less than 0,075 mm/s;

5. Atomising nozzles precise spray pattern The nozzle chosen is one of the 1/4JAU Series air Atomising nozzles, with a set-up giving a 360-degree hollow-cone circular spray pattern

6. Tubs and basins of plastic, ceramic and metal for sanitary purposes, including tubs and basins with swirl nozzles and/or aerating nozzles, nozzle fittings and pumps for tubs with swirl nozzles, blowing machines, including blowing machines with heating mechanisms for heating the blast air, for aerating bathing water in tubs

7. Atomizer nozzles can create Atomization from a variety of mechanical means, which includes but is not limited to electrostatics processes, ultrasonic nozzle and centrifugal forces.

8. Ionizing air nozzles

9. Venting nozzles – nozzles supplying the air to the material inside the silo.

10. Tubs and basins for sanitary purposes, including with swirl nozzles and aerating nozzles

11. Nozzles for watering cans

12. The adjustable nozzle units include a nozzle plug (160) arranged within a nozzle bore (166).

13. An Axisymmetric nozzle is a three-dimensional (3D) nozzle

14. Adjustable nozzle

15. The oxygen-containing gas addition nozzle has a nozzle outlet in the circumferential direction of the fuel nozzle.

16. Compactness, durability, and low cost--everything that has been missing in many typical shutoff nozzles--are delivered by the new Mini-Shut nozzle, according to Md Plastics Inc., Columbiana, Ohio

17. Air Atomizing Spray Nozzles Air Atomizing nozzles atomize fluids by creating a very fine spray

18. Choose from our selection of air Blowoff nozzles, including air nozzles, blowguns, and more

19. Money from nozzles is 22n.

20. Bubblers & Bubbler Nozzles; Page

21. Self-adjusting nozzle

22. Tubs and basins of plastic for sanitary purposes, including with swirl nozzles and/or aerating nozzles

23. Internal fuel manifold with airblast nozzles

24. Adjustable slit nozzle

25. Airless spray nozzle

26. Adjustable nozzle assembly

27. Carburetor with fuel nozzle

28. Conveyor belt with combined air nozzles

29. Scrubber nozzle testing device

30. A gas turbine engine (10) internal fuel manifold (22) has a plurality of airblast fuel nozzles (26) in communication with an air source such that nozzle core air does not pass through the manifold (22).

31. The underwater intake nozzle assembly may include a collector and a converging nozzle.

32. Intake and exhaust nozzle

33. Nozzle for silicon container

34. Nozzles for spray guns for vaporising, spraying or diffusing paints, lacquers, dispersions, adhesives, resins, coolants and lubricants, disinfectants and similar preparations, in particular nozzles for the non-pressurised application of media (airless nozzles)

35. It's an enema nozzle.

36. Variable nozzle device of turbocharger

37. Air Atomizing spray nozzles, also called two-fluid nozzles, produce finely atomized sprays using compressed air or another Atomizing gas

38. Adjustable nozzles for use in whirlpool baths

39. Nozzle adjustment aid, and method

40. The variable nozzle (10) is provided with a control unit for adjusting the nozzle cross section.

41. The suction device comprises a nozzle having an adjustably mounted nozzle body and a suction channel.

42. Yes, we should check the carburetor nozzles also.

43. The temperature of the nozzle (20) is adjusted by means of a nozzle temperature adjustment means (30).

44. Avgas fueling nozzles for overwing dispensing are painted red

45. Jet nozzles for warm air circulation in bubble baths

46. Air Atomising Nozzles are twin fluid type spray nozzles, usually using compressed air and a liquid to create an atomised droplet

47. Atomising Nozzles Dyson Technical Ceramics are principle manufacturers of high performance Zirconia Atomising Nozzles for use in the Powder Metallurgy industry

48. Outlet nozzle of nuclear reactor

49. & Print a nozzle test pattern

50. Catheter and enema nozzle in latex.

51. Kiln car cleaning system (In different execution: Fixed nozzle, moving nozzle, lifting and adjusting of the plateau)

52. Piping basket-weave For this you will need both a plain writing nozzle and a basket-weave nozzle.

53. The rubber nozzle is all cracked.

54. Cool air stage for rapid cooling on changing nozzles.

55. An adjustable vent nozzle comprises first and second nozzle members (1, 2) turnable relative to one another.

56. Remember that, 11 people, each asked him for two nozzles.

57. Like the nozzles that blow cooling air onto you?

58. Nozzle with adjustable-delivery rotary jet

59. A method of abrasive cleaning comprises emitting from a nozzle a gaseous stream having a blasting media suspended therein, moving the nozzle in first and second opposed directions, and rotating the nozzle.

60. Common rail injector having spiral spray nozzle

61. A method for making a nozzle plate for an inkjet printer by laser ablating a nozzle plate material.

62. Turbocharger with assist nozzle and adjustable throat

63. Nozzle cleaning blade of dispensing jet valve

64. Sanitary installations, in particular wash basins and washstands, bath tubs and bath basins of metal or of plastics, including with swirl nozzles and aerating nozzles

65. The cold air within the nozzle throat cools the nozzle throat skin, which serves as air-conditioner core.

66. For one embodiment, an underwater tower nozzle may be fluidly coupled between the turbine and the underwater intake nozzle assembly.

67. The Delavan AL air Atomising series spray nozzles offer the user a wide variety of spray patterns, flow rates and atomisation AL 15 - External Mix The AL 15 series is a pressure-fed external mix flat fan spray nozzle AL 30 - Internal Mix

68. Universal nozzle for a laser cutting machine and method for adjusting the universal nozzle in a laser cutting machine

69. Tubs and basins of plastic for sanitary purposes, including with swirl nozzles and/or aerating nozzles, including washbasins, bath tubs, shower trays and swirl tubs

70. Sprays, nozzles, hose holders, adjustable tubes, filters for detection composites.

71. Cleaning and disinfecting device with adjustable nozzle

72. We're only focusing on nozzle sales here.

73. Nozzle assembly with adjustable plunger travel gap

74. Method and blasting nozzle for cleaning surfaces

75. Nozzle film cooling with alternating compound angles

76. High pressure water/abrasive jet cutting nozzle

77. A scrubber nozzle testing device is disclosed.

78. Turbocharger equipped with a variable nozzle device

79. In effect, it turns the nozzle inside out.

80. The width of the orifice (75) may be adjusted by replacing either nozzle member with nozzle members of different configurations.